Lift-assist closeout – Great Plains 3P1006NT Operator Manual User Manual
Page 91
Advertising
Great Plains Manufacturing, Inc.
Appendix B - Pre-Delivery
87
2011-12-20
151-144M
Lift-Assist Closeout
Refer to Figure 62
34. Locate one sets of stroke control spacers:
810-242C STROKE CONTROL SPACERS 1 1/8
If they are in the main seed box, relocate the set to
the rod on the weldment.
35. With the drill lowered on the lock channel. Make sure
cylinder is fully seated on the channel, and that no
part of the channel is at a cylinder bolt face.
36. Perform a side to side level check, and make any
adjustment required, per “Eyebolt Adjustment” on
page 50.
Figure 62
Stroke Control Spacers
32058
168
168
Advertising