Great Plains Gauge Wheel-Spindle - Manual (Page 2)

Great Plains Mfg., Inc.
2 Dual Gauge Wheel/Spindle Update
195-080M 04/10/2009
Call-Outs
Before You Start
Compatibility
Refer to Figure 2
1.
Make sure that the drill is a compatible model.
Check the serial number plate against the table on
page 1. Verify from the serial number that the drill is
compatible with this kit.
Early model 3000-3S and 3S-3000 drills have an
incompatible hub size.
Inventory
2. Make sure all parts are present.
Comprehension
3. Review these instructions. Make sure the installers
understand where each part or assembly is
installed, and what tools are required for the task.
Note: Illustrations in this manual, based on the parts
manuals for this family of drills, may show
exploded views that are fully disassembled. Rely
on the instructions for required disassembly and
reassembly steps.
to Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Two-digit callouts in the range 11 to 39 refer-
ence new parts from the new parts lists
beginning on page 20.
to Two-digit callouts in the range 51 to 70 refer-
ence affected existing parts from the table on
page 22. The descriptions match those in
your Parts Manual. The narrative and table
indicate any re-use of the parts.
1 9
11 39
51 70
Figure 2
Serial Number Plate
15614
U
D
F
B
L
R