Great Plains 3S-5000HD Assembly Instructions - Manual (Page 8)

4 3S-5000/F/HD/HDF SGS Table of Contents Index Great Plains Manufacturing, Inc.
133-415M Table of Contents Index 2013-07-30
Using This Manual
This manual familiarizes you with safety, assembly,
operation, adjustments and maintenance. Follow the
recommendations to help ensure safe and efficient
operation.
Definitions
The following terms are used throughout this manual.
Note: Paragraphs in this format provide useful
information related to the current topic.
Liability, Economic and Results Risks:
Paragraphs in this format present a crucial point of information
related to the current topic. Read and follow the directions to:
remain safe, avoid serious damage to equipment and ensure
desired field results.
Right-hand and left-hand as
used in this manual are
determined by facing the
direction the machine will
travel while in use unless
otherwise stated.
An orientation rose (shown at
right) depicts Up, Right, Back,
Down, Left and Front.
Call-Outs
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products. Your machine’s parts were specially designed
and should only be replaced with Great Plains parts.
Record your small seeds option kit model number here
for quick reference:
Model Number:__________________________
Date Purchased: __________________________
Your Great Plains dealer wants you to be satisfied with
your updated machine. If you do not understand any part
of this manual or are not satisfied with the service
received, please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any
problems so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060 Salina, KS 67402-5060
785-823-3276
Figure 2:
3S-5000 Drill
34310
R
L
U
D
F
B
L
R
Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Two-digit callouts in the range 11 to 30
reference existing parts removed and
reused. They are listed on page 33.
to Three-digit callouts in the range 101 to 267
reference new parts from the new parts list
beginning on page 34. The descriptions
match those on the parts, cartons, bags or
item tags, as well as descriptions your
updated Parts Manual.
U
D
L
R
B
F
1
11 30
101 267