Great Plains CF60 Operator Manual - Manual (Page 10)

CF50 and CF60
500-015M 4/16/2003
8
818-335C
Red Reflector
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by the manufacturer. When ordering new components make
sure the correct safety labels are included in the request. To
order new labels go to your Great Plains dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Peel backing from label. Press firmly on surface
being careful not to cause air bubbles under label.
818-055C
Slow Moving Vehicle Label
818-184DC
Amber Reflector
12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178 12178
12179
12178
12182
12179