Great Plains CF60 Operator Manual - Manual (Page 14)

CF50 and CF60
500-015M 4/16/2003
12
Owner Assistance
If you need customer service or repair parts, con-
tact a Great Plains dealer. They have trained
personnel, repair parts and equipment specially
designed for Hydraulic Cross-Fold Boom
products.
Refer to Figure 1
Your machine’s parts were specially designed and
should only be replaced with Hydraulic Cross-Fold
Boom parts. Always use the serial and model
number when ordering parts from your Great
Plains dealer.
Record your sprayer model and serial number
here for quick reference:
Model Number:__________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with the
service received, please take the following
actions.
1. Discuss the matter with your dealership ser-
vice manager. Make sure they are aware of
any problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
15736
Figure 1
Serial Number