Great Plains CF60 Operator Manual - Manual (Page 21)

4/16/2003 500-015M
19 Troubleshooting
Troubleshooting
Problem Problem Area Specific Checks Corrections
Excessive cable wear Cable & roller Cable Wearing Check cable & roller for obstructions or wear
points. Remove obstruction.
Roller not turning properly Replace roller or roller bushing.
Excessive cable wear Replace cable.
Pressure increasing Between gauge
& nozzle Boom hoses becoming clogged Remove obstruction from clogged area.
Boom hoses pinched Use cable ties to position hose so it will not kink.