Hydraulic hose hookup, Current style color coded hose handles, Check drill level – Great Plains 3S-3000HDF Operator Manual v1 User Manual
Page 23: Hydraulic hose hookup check drill level
Great Plains Manufacturing, Inc.
Preparation and Setup
19
2014-07-01
195-441M
Hydraulic Hose Hookup
High Pressure Fluid Hazard:
Only trained personnel should work on system hydraulics!
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin, causing serious injury. Avoid the hazard by
relieving pressure before disconnecting hydraulic lines. Use a
piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems. If an accident occurs,
seek immediate medical attention from a physician familiar
with this type of injury.
Current Style Color Coded Hose Handles
Refer to Figure 10
Great Plains hydraulic hoses have color coded handle
grips to help you hookup hoses to your tractor outlets.
Hoses that go to the same remote valve are marked with
the same color.
To distinguish hoses on the same hydraulic circuit, refer
to the symbol molded into the handle grip. Hoses with an
extended-cylinder symbol feed cylinder base ends.
Hoses with a retracted-cylinder symbol feed cylinder rod
ends.
1.
Connect opener-lift hoses to circuit designated for
hydraulic-motor control.
2.
Connect transport-lift hoses to tractor remote valve.
3.
Connect fold hoses to tractor remote valve.
4.
Connect marker hoses to tractor remote valve.
Check Drill Level
These items are set and verified at the factory, but need
to be checked prior to first use.
• “Center Box Frame Leveling” on page 74
• “Opener Frames Level” on page 75
• “Wing Box Alignment” on page 76
• “Align Transfer Drive Shaft” on page 77
• “Opener-Frame Clearance” on page 80
Color
Hydraulic Function
Red
Opener Lift Cylinders
Blue
Transport Lift Cylinders
Gray
Fold Cylinders
Green
Marker Cylinders
FigureSpacer
To run drill on tractors with open-center hydraulics or on
tractors with fixed-displacement hydraulic pumps, you must
install a Great Plains kit, part number 194-143A. If you are
not familiar with your tractor hydraulics, consult your trac-
tor dealer.
Note: If your tractor has only two remote valves, you must
install a double-selector valve to combine the
transport-lift and opener-lift circuits. See “Two
Outlet Hydraulic Kit” on page 91.
Figure 10
Color Coded Hose Grips
31733