Great Plains 3S-3000HDF Operator Manual v1 - Manual (Page 44)

40 3S-3000/F/HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
195-441M Table of Contents Index 2014-07-01
Acremeter Operation
The acremeter
a
counts shaft rotations whenever the
shaft is rotating - normally this is only with the Three
Section 3000 Folding Drill lowered and in motion. The
meter is programmed to display rotations as acres or
hectares, when using all rows, factory-specified tires and
tire inflations.
Note: Unusual conditions and/or non-standard row
spacings can cause the acremeter tally to vary
somewhat from actual acres planted.
Refer to Figure 35
Acremeters supplied with model 3S-3000/F/HD/HDF
drills have varied over time. For operational details
(modes, resets, calibration), see the manual supplied
with the acremeter:
a. An electronic acremeter is available as an upgrade for older drills having a mechanical acremeter.
Meter Style and Manual
194-074M 152-314M
152-325M 194-209M
Figure 35
Acremeters
34776
34937
27378
36275
1
2
3
4
1 3
2 4