Great Plains 2525A Operator Manual - Manual (Page 100)

118-999M Table of Contents Index 2013-06-04
96 2025A/2525A Table of Contents Index Great Plains Manufacturing, Inc.
Appendix B - Initial and Option Setup
Pre-Delivery Items
These items are normally completed by the Great Plains
dealer prior to releasing the implement to the customer.
Install Press Wheels
To meet highway clearance requirements, press wheel
arms and wheels on wing rows are not factory-installed.
Refer to Figure 83
1. Remove and save the
1 ⁄
2
-13x1in hex head bolt and
washer at the back of an incomplete row unit .
There are four bolts at this location. Remove only the hex head
bolts. Do not loosen or remove the square head bolts forward.
2. Remove and save the
1 ⁄
2
-13x1
1 ⁄
2
in hex head bolt ,
washer, and eccentric adjuster nut.
3. Align the
1 ⁄
2
in holes in the press wheel assembly
with the
1 ⁄
2
-13 tapped holes in the row unit, loosely
assemble with the
1 ⁄
2
-13x1in hex head bolt and
washer .
4. Loosely screw in the
1 ⁄
2
-13x1
1 ⁄
2
in hex head bolt ,
washer, and eccentric adjuster nut. Rotate the
adjuster to visually align the press wheel assembly
with the row unit, and tight the adjust and both bolts.
Figure 83
Press Wheel Assembly
25383
1
2 4
3
2 3
4
2
4