Great Plains 3PNG15 Operator Manual - Manual (Page 14)

10 3PNG12 and 3PNG15 Great Plains Manufacturing, Inc.
202-553M 10/06/2008
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer.
Refer to Figure 2
The serial-number plate is located on the front face of the
frame.
Record your drill model and serial number here for quick
reference:
Model Number:________________________________
Serial Number: ________________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 2
Serial Number Plate
16404