Great Plains 3PNG15 Operator Manual - Manual (Page 41)

10/06/2008 202-553M
Great Plains Manufacturing, Inc. Options 37
Options
Accessory Hitches
Accessory hitches convert a 3-point drill to a pull-type
drill. In addition to any other capabilities of the hitch, this
allows use of the drill with a tractor that can pull the drill
but not lift it, or a tractor that is not 3-point.
The hitch also increases the weight available for use as
row unit down force, and may accept additional weights
to increase force further.
Depending on model, accessory hitches also include or
support these capabilities:
• Wet fertilizer distribution.
• Frame-mounted coulters for more severe no-till condi-
tions.
• Frame weights.
• Hitch-mounted markers.
Center Pivot Hitch model CPH-15 may be used with
3PNG15 drills.
Precision Fertilizer Hitch model PFH-15 may be used
with 3PNG15 drills.
The Sub-Soiler Hitch, model SSH, may be used with any
3PNG drill.
The Pull Hitch Package (part number 124-025A) pro-
vides basic conversion of a 12- or 15-foot 3-point drill to
pull configuration.
Note: PFH and Pull Hitch are not compatible with dual-
gauge wheel drills, unless a Hitch Setback kit is in-
stalled.
Note: PFH hitches with tanks are not compatible with
drill-mounted markers, unless a Hitch Setback kit is
installed. Or use hitch-mounted markers.
Hitches are a separate product line, with options of their
own. Consult your Great Plains dealer for detailed con-
figuration and ordering information. Operations are
described in the Hitch Operator’s manual.
Hitch Setback Kit
This accessory extends the 3-point hitch to eliminate
interference with CPH, PFH and SSH auxiliary hitches.
12074
18078
21595
CPH
PFH
SSH
13276
124-025A
Pull Hitch Package
Description Part Number
25 SERIES PFH SETBACK KIT 118-130A
26225