Great Plains 3PNG15 Operator Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. 5
10/06/2008 202-553M
Safety Decals
Your implement comes equipped with all safety reflectors
and decals in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
On back of last seedbox, near center;
one total
838-266C
Red Reflectors
Rear face, outside ends of walkboard;
two total
22520
22520