Great Plains NTA1300 Predelivery Manual - Manual (Page 2)

Table of Contents
© Copyright 2001 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation
of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-
tion contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the
time of its publication, and may not reflect the product in the future.
Great Plains Manufacturing, Incorporated Trademarks
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Great Plains Mfg., Inc.
Table of Contents
NTA 1000 and NTA 1300 148-528Q 7/29/2004
Important Safety Information . . . . . . . . . . . . . . . . . 0
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Description of Unit . . . . . . . . . . . . . . . . . . . . . . . . 1
Intended Usage. . . . . . . . . . . . . . . . . . . . . . . 1
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . 1
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Assembly and Setup Assistance . . . . . . . . . . . . . 1
Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Assembly Checklist. . . . . . . . . . . . . . . . . . . . 2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pivot Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cylinder Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . 4
Spring Leaf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Telescoping Tube . . . . . . . . . . . . . . . . . . . . . . . . . 5
Transport Wheels. . . . . . . . . . . . . . . . . . . . . . . . . 5
CPH to “H” Frame . . . . . . . . . . . . . . . . . . . . . . . . 6
Sub-Frame to Box . . . . . . . . . . . . . . . . . . . . . . . . 7
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Handrails and Steps . . . . . . . . . . . . . . . . . . . . . 10
Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Toolbar Extension . . . . . . . . . . . . . . . . . . . . . . . 18
Opener Extension . . . . . . . . . . . . . . . . . . . . . . . 19
Seed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Hitching Tractor to CPH . . . . . . . . . . . . . . . . . . . 21
Hydraulic Hose Hookup . . . . . . . . . . . . . . . . . . . 22
Bleeding the Hydraulics . . . . . . . . . . . . . . . . . . . 23
Bleeding Transport Lift Cylinder . . . . . . . . . 23
Bleeding Tongue Cylinders . . . . . . . . . . . . . 24
Bleeding Fold Cylinders . . . . . . . . . . . . . . . 24
Bleeding Markers (Options) . . . . . . . . . . . . 25
Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Lift and Tongue Hydraulics . . . . . . . . . . . . . . . . . 26
Fan Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Fan Hydraulics NTA 1300. . . . . . . . . . . . . . . . . . 28
Folding Hydraulics NTA 1300 . . . . . . . . . . . . . . . 29
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Hydraulic Hose and Fitting . . . . . . . . . . . . . . . . . 31
Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . 31
Torque Values Chart for Common Bolt Sizes . . . 32
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33