Great Plains NTA1300 Predelivery Manual - Manual (Page 23)

21 7/29/2004 NTA 1000 and NTA 1300 148-528Q
Great Plains Mfg., Inc.
Seed Tube and Hose
Refer to Figure 33
1. Attach the seed tube (2) to the opener (1) by sliding
the tube into the opener, with the end flap facing the
back of the opener. Secure using two 10-16 x 3/8 hex
screws (3).
2. Screw a 2” (50mm) long section of the 1” black seed
hose into the white seed hose leading from the drill.
(A soap and water solution will aid in this assembly.)
3. Screw the narrow end of the hose boot onto the sec-
tion of black seed hose from the drill. Fit the large end
of the hose boot over the seed tube on the opener.
19486
Figure 33
Seed Tube and Hose
Assembly