Great Plains LC40 Operator Manual - Manual (Page 14)

591-049M Table of Contents Index 2014-07-21
10 LC40 Table of Contents Index Great Plains Manufacturing, Inc.
Introduction
Great Plains welcomes you to its growing family of new
product owners. The 40 Foot Lister / Cultivator (LC40)
has been designed with care and built by skilled workers
using quality materials. Proper setup, maintenance, and
safe operating practices will help you get years of
satisfactory use from the machine.
Description of Unit
The LC40 Lister / Cultivator is a 3-point mounted soil
preparation implement for use in bedded conditions. The
three section stack-folding tool bar has a working width
of 40 feet (12.2 m). It accepts:
• short or long lister row units, or
• cultivator row units, with optional barring-off discs.
Row units may be converted between lister and cultivator
functions by exchanging components.
Multiple points of adjustment are provided.
Intended Usage
Use the LC40 Lister / Cultivator for building and
maintaining beds in conventionally tilled ground. Do not
modify the lister / cultivator for use with attachments
other than Great Plains options and accessories
specified for use with the LC40.
Models Covered
Document Family
Using This Manual
This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting, and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
A crucial point of information related to the current topic. Read
and follow the directions to remain safe, avoid serious damage
to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
2013- refers to implements manufactured in 2013 or
earlier.
2014+ refers to implements manufactured in 2014 or
later.
Figure 1
LC40 Lister / Cultivator
34855
U
D
F
B
L
R
L
R
LC40-1236 40-foot, 12-row (13-unit), 36 inch spacing
LC40-1238 40-foot, 12-row (13-unit), 38 inch spacing
LC40-1240 40-foot, 12-row (13-unit), 40 inch spacing
LC40-1630 40-foot, 16-row (17-unit), 30 inch spacing
591-049M Owner’s Manual (this document)
591-049P Parts Manual
U
D
F
B
L
R