Great Plains LC40 Operator Manual - Manual (Page 21)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 17
2014-07-21 Table of Contents Index 591-049M
Leveling the Implement
Center Frame L/R Leveling
1. Hitch the lister / cultivator to a tractor (page 13).
2. Raise the implement. Unfold it (page 20).
Refer to Figure 9
3.
Adjust the tractor 2-point lift arms so that the center
section tool bar is level.
Wing Leveling
Refer to Figure 10
4.
Check wing for level at the top of the tool bar.
Refer to Figure 11
To adjust wing level:
5. Loosen the jam nut at the upper link arm adjuster.
6. Remove and save the fasteners securing the clip
lock .
7. Rotate the adjust nut until the wing is level.
8. Reinstall the clip lock. Secure the jam nut.
Front-to-Back Leveling
See “Front-to-Back Leveling” on page 26. This
adjustment needs to be completed in field conditions.
Figure 9
Center Section Level
34862
Figure 10
Wing Level
34862
1
1
2
3
4
Figure 11
Adjuster Clip
34913
1
4
2
3