Safety decals, Safety reflectors and decals, Transport decals – Great Plains LC40 Operator Manual User Manual
Page 9: 055c slow moving vehicle reflector, 266c red reflectors
Great Plains Manufacturing, Inc.
Important Safety Information
5
2014-07-21
591-049M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
Transport Decals
818-055C
Slow Moving Vehicle Reflector
On center rear face of center frame tie tube;
1 total
838-266C
Red Reflectors
On rear face of light bracket mount tube, at each
outboard end, one rear of wing tool bars, one each
outboard end;
4 total
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
34856
34856