Great Plains 1006 Assembly Instructions - Manual (Page 15)

8/2/2005 151-118M
Great Plains Mfg., Inc.
15 Installation Instructions
Native Grass Seed Tube Installation
Refer to Figure 21
46. Insert the native grass seed tube (1) in the
hole behind the springs and secure in place
with two 10-16 x 3/8" screws and 1/4" flat
washers.
47. Attach one end of the seed hose (2) to the
seed tube (1) with a #42 hose clamp the other
end to the native seed cup with a #42 hose
clamp.
Walkboard Assembly
48. Assemble walkboard on the end panels and
walkboard supports using hardware removed
in step 2 on page 10.
49. Attach SMV sign and add all safety and warn-
ing decals to the walkboard.
50. Refer to your Great Plains seed rate book and
operator’s manual for setup, calibration and
use.
Figure 21
Seed Tube
22617