Great Plains 1006 Assembly Instructions - Manual (Page 6)

151-118M 8/2/2005
Great Plains Mfg., Inc.
Option Installation 6
Fertilizer Box
1. Lower drill to the ground.
2. Remove walkboard, walkboard mounts and
walkboard supports. Save hardware.
3. Remove and save all box handles and hard-
ware.
4. Assemble new walkboard end panels and
harrow supports. Re-attach existing ladder to
left-hand walkboard end using hardware re-
moved in step 2.
Refer to Figure 7
5. Attach the fertilizer box mount brackets (1) to
the fertilizer box (2) where the fertilizer box
partitions are located. Use the bolts and nuts
holding the partitions.
6. Mount the fertilizer box (2) to the seed box us-
ing 1/2" x 1 1/4" bolts and 1/2" flange nuts on
the outside ends. Use existing bolts and nuts
from the seed box partitions to attach the box
mount brackets (1). Use 1/2" x 1" bolts, 1/2"
lock washers and 1/2" nuts to attach the box
to the drill frame.
7. Attach the handles (3) removed in step 3 to
the fertilizer box (2) using the hardware re-
moved in step 3.
Figure 7
Fertilizer Box
22560