Great Plains 1006 Assembly Instructions - Manual (Page 16)

151-118M 8/2/2005
Great Plains Mfg., Inc.
Option Installation 16
Adding Native Grass or Fertilizer to
Drills with Seed & SGS
1. Lower drill to the ground.
2. Remove walkboard, walkboard mounts and
walkboard supports. Save hardware.
3. Disassemble small grass drive chain from
front of drill. Remove SGS box and mount
brackets from rear of seed box and frame end
panels. Keep all hardware for reuse.
4. Assemble new walkboard end panels and
harrow supports. Re-attach existing ladder to
left-hand walkboard end using hardware re-
moved in step 2.
5. To attach and assemble native grass or fertil-
izer box refer to appropriate corresponding
assembly instructions found in this manual.
6. Refer to small grass seeds assembly instruc-
tions found on page 2 of this manual to reas-
semble SGS box.