Great Plains 2N-3010 Parts Manual - Manual (Page 151)

Revision Comments Part Description Part No. Ref.
Image No. dwg15580
VALVE DELAY ROLLER #8001 810-296C 1.
CABLE TIE .31X21.5 6DIA 120LB 800-082C 2.
CPH CLTR CMD SWITCH GUIDE BLK 817-170C 3.
24 VALVE MOUNT WELDMENT 196-181H 4.
30 VALVE MOUNT WELDMENT 196-182H 4.
WASHER FLAT 3/8 SAE PLT 804-012C 5.
WASHER LOCK SPRING 3/8 PLT 804-013C 6.
NUT HEX 3/8-16 PLT 803-014C 7.
HHCS 1/4-20X2 GR5 802-152C 8.
WASHER FLAT 1/4 SAE PLT 804-007C 9.
WASHER LOCK SPRING 1/4 PLT 804-006C 10.
NUT-HEX 1/4-20 PLT 803-006C 11.
CYLINDER CLEVIS CHANNEL WLD 196-179H 12.
2nd rev. DELAY VALVE ROD WELDMENT 196-191H 13.
Use existing stock; 1st rev. RPBY 196-191H 196-180H 13.
HHCS 5/16-18X1 GR5 802-159C 14.
WASHER LOCK SPRING 5/16 PLT 804-009C 15.
NUT HEX 5/16-18 PLT 803-008C 16.
HH1/2R2 084 3/4MJIC 3/4MORB90 811-571C 17.
2nd rev. 30' Drill HH1/2R2 472 1/2MNPT 3/4MORB 811-575C 18.
Use existing stock; 1st rev. RPBY 811-575C 811-481C 18.
2nd rev. 24' Drill HH1/2R2 435 1/2MNPT 3/4MORB 811-576C 18.
Use existing stock; 1st rev. RPBY 811-576C 811-483C 18.
Updated with Field Update SPACER PLATE 196-380D 19.
Updated with Field Update DELAY VALVE MOUNT 196-383D 20.
Updated with Field Update HHCS 3/8-16X2 GR5 802-143C 21.
01/31/14 - 151 - 196-126P Rev. A
Table of Contents Part Number Index
Hydraulics
Delay Valve And Plumbing (S/N C1692- 24' Drills S/N D1904- 30' Drills)
(Applies to 2N-2410 (1995+), 2N-3010 (1995+) only)