Great Plains 2N-3010 Parts Manual - Manual (Page 81)

Revision Comments Part Description Part No. Ref.
Image No. dwg13454
Rev. 2 is not interchangeable
w/rev.1
April 1997+ SCREW HEX SELF TAP 1/4-20X3/4 801-081C 1.
1st rev. HHCS 1/4-20X5/8 GR5 802-078C 1.
WASHER LOCK SPRING 1/4 PLT 804-006C 2.
WASHER FLAT 1/4 SAE PLT 804-007C 3.
GAUGE WHEEL CHAIN COVER-FRONT 152-259D 4.
GAUGE WHEEL CHAIN COVER-REAR 152-260D 5.
NUT-LOCK 1/4-20 PLT 803-007C 6.
FLEX LINK PIVOTPIN 1 1/4X2 7/8 181-038D 7.
HHCS 1/4-20X2 GR5 802-152C 8.
GAUGE WHEEL BOTTOM COVER 152-282D 9.
2nd rev. 2SNT GW FLEX LUG 152-385D 10.
Use existing stock; 1st rev. RPBY 152-385D 152-265D 10.
BUSHING CYL 1 1/4 X 1 X 1 890-005C 11.
BUSHING SPINDLE 1 1/2X1 1/4X1 890-011C 12.
01/31/14 - 81 - 196-126P Rev. A
Table of Contents Part Number Index
Drives
Gauge Wheel (S/N C1692- 24' Drills And D1904- 30' Drills)
(Applies to 2N-2410 (1995+), 2N-3010 (1995+) only)