Walkboard assembly – Great Plains 6 Foot Drill Native Grass 3P605NT User Manual
Page 10
Advertising
202-448M
3/22/2005
Great Plains Mfg., Inc.
Native Grass Option
10
Refer to Figure 12
13. Attach box cover (24) by fastening the four
thumb screws (25) to the weld nuts (26) on
native grass left box panel.
Walkboard Assembly
Refer to Figure 13
14. Mount new walkboard (1) to drill using four 3/
8 x 1-1/4 inch bolts (2), lock washers (3), and
hex nuts (4).
15. Attach slow moving vehichle assembly (5) to
the new walkboard (1) with hardware (6)
saved on page 1, step 1.
16. Mount the two steps (7) to new walkboard us-
ing hardware (8) saved on page 1, step 2.
18664
Figure 13
Native Grass Walkboard Installation
18661
Figure 12
Native Grass Seed Box Cover
Advertising
This manual is related to the following products: