Great Plains 6 Foot Drill Native Grass 3P605NT - Manual (Page 2)

202-448M 3/22/2005
Great Plains Mfg., Inc.
Native Grass Option 2
Native Grass Opener Removal
(For drills with S/N: VV1044 and below)
05 Series Opener Removal
Refer to Figure 2
1. Pull out seed hose (1) from opener seed tube.
Save clamp (2) for later use.
2. Remove spring rods (3) from mounting by re-
moving 1/4 x 3/4 inch hex bolts (4). Save
bolts, washers and nuts for later use.
3. Take off opener (5) from drill by removing 1/2
x 7-1/4 inch round head square neck bolt (6).
Save bolt and hex flange nut for later use.
Figure 2
05 Opener Removal
18668