Great Plains 6 Foot Drill Native Grass 3P605NT - Manual (Page 3)

3/22/2005 202-448M
Great Plains Mfg., Inc.
3 Installation Instructions
Native Grass Opener Installation
(For drills with S/N: VV1044 and below)
Refer to Figure 3
4. Install native grass opener (7) using the 1/2 x
7-1/4 inch round head square neck bolt (8)
and hex flange nut.
5. Push spring rods (9) up through mounts and
attach 1/4 x 3/4 inch hex bolts (10) as shown.
6. Attach seed hose (11) to native grass opener
seed tube with clamp (12).
7. Place native grass hose (13) over native
grass seed tube (14) and fasten with clamp
(15). Save clamp (16) for later use.
Figure 3
Native Grass Opener Installation
18669