Native grass box to main box assembly – Great Plains 6 Foot Drill Native Grass 3P605NT User Manual
Page 5
Advertising
3/22/2005
202-448M
Great Plains Mfg., Inc.
5
Installation Instructions
Native Grass Box to Main Box
Assembly
Refer to Figure 5
1.
Remove handles (1) by removing 1/2 inch hex
flange bolts (2) and hex flange nuts (3). Save
bolts, nuts and handles for later use.
Refer to Figure 6
2.
Mount the native grass seed box (4) to main
box using eight 1/2 x 1-1/4 inch bolts (5), lock
washers (6) and hex nuts (7).
3.
Attach handles (8) with 1/2 inch hex flange
bolts and hex flange nuts removed in step 8
above.
4.
Attach top of native grass hoses to native
grass seed cups with remaining hose clamps.
Figure 5
Handle Removal
18651
Figure 6
Native Grass Seed Box Mounting
18659
Advertising
This manual is related to the following products: