Great Plains 6 Foot Drill Native Grass 3P605NT - Manual (Page 4)

202-448M 3/22/2005
Great Plains Mfg., Inc.
Native Grass Option 4
Native Grass Seed Tube Installation
(For drills with S/N: VV1045 and above)
Refer to Figure 4
1. Insert the native grass seed tube (1) in the
hole behind the springs and secure in place
with two 10-16 x 3/8" screws and 1/4" flat
washers.
2. Attach one end of the seed hose (2) to the
seed tube (1) with a #40 hose clamp (3). Save
the #42 hose clamps (4) to attach hose (2) to
the native seed cup.
Figure 4
Seed Tube
21573