Great Plains 6 Foot Drill Native Grass 3P605NT - Manual (Page 7)

3/22/2005 202-448M
Great Plains Mfg., Inc.
7 Installation Instructions
Refer to Figure 8
5. Place 16 tooth splined sprocket (11) on left
rear gearbox shaft and secure with snap ring
(12).
6. Refer to on the previous page. Align native
grass drive shaft and tighten bearing flange
bolts. Align 17 tooth sprockets and secure
with keys (13) & (14).
7. Attach 17 tooth idler sprocket (15) and spacer
(16) with 5/8 x 2 inch bolt (17) and hex flange
nut (18) to mount as shown.
8. Attach 12 tooth idler sprocket (19) with 1/2 x 3
inch bolt (20), hex jam nut (21), USS flat
washer (22) and hex flange nut (23).
Figure 8
Native Grass Seed Box Idler Assembly
18663