B&G Zeus 12 - Manual (Page 16)

15
3. Using the Simulator
Simulator Mode
The simulation mode simulates main data sources, so you can see how the unit works
without being connected to echosounder, radar, GPS etc.
You can use the simulator to help you become familiar with your unit before using it out
on the water.
When the simulator is toggled on, this is indicated in the lower part of
the display.
Demonstration Mode
In this mode the unit automatically runs through the main features of
the product; it changes pages automatically, adjusts settings, opens
menus etc.
If you press a key when demo mode is running, the demonstration will
pause. After a time-out period, demo mode will resume again.
Selecting simulator source fi les
You can select which data files that should be used by the
simulator.
A set of source files is included in your system, and you can
import files by using a USB stick or a memory card. Refer
to the utilities pages section. You can also use your own
recorded echosounder files in the simulator. For how to record
echosounder files, refer to the Using the echosounder section.
Advanced Simulator Settings
The advanced simulator settings allow you to define how to run the
simulator. When the settings are saved these will be used as default
when starting the simulator mode.
Source fi les
Selects data to be used.
A set of source files is included in your system, and you
can import files by using a USB stick or a memory card.
Refer to The utilities pages section.
You can also use your own recorded echosounder files in
the simulator.
For how to record echosounder files, refer to the Using
the echosounder section.
GPS source
Selects which source file the GPS data is delivered from.
Speed, Course and Route
Used for manually entering values when GPS source is set to Simulated course or
Simulated route. Otherwise, GPS data including speed and course comes from the
selected echosounder or radar files.
Set start position
Moves the vessel to current cursor position.
MENU WIN
x2