B&G Zeus 12 - Manual (Page 88)

87
Operating the Modes Function
These modes allow one press activation of circuits simplifying control. For example, you
could activate the Cruise mode, turning on all the circuits that are needed to operate
your vessel while cruising. However, when you leave the vessel you can select Systems
Off
mode which will shut down all non 24h circuits.
These modes provide a one press functionality that also allows multiple circuits to be
controlled efficiently. Modes are configured at the time of installation. All available
modes will be displayed on the CZone panel.
If there are more than 5 modes configured on screen the rest of the modes will move to
the More Modes option.
System Overview Options
Systems In Operation
This mode enables you to monitor all on board parameters including tank levels
displayed in graphical, percentage and volume remaining formats.
Control, Monitoring
The left side of the display shows control options while the right side shows monitoring
information.
Alarms
The Alarm displays visual and audible alarms that can be set for high and low levels.
MODE FUNCTIONS
MORE
MODES
SYSTEM OVERVIEW
OPTIONS
(7,8,9)