B&G Zeus 12 - Manual (Page 29)

28
Routes
A route consists of a series of route points waypoints or
entered in the order that you want to navigate them.
When you rest the cursor over a route, it will turn blue
and the route name will be displayed.
Creating new routes by using the cursor
You can create a new route on the Chart panel as follows:
Press the ‘ 1
PLOT’
key and select the new route option
Use the arrow keys to move the cursor to the position for the fi rst route point 2
Confi rm the position by pressing the tick key or rotary knob 3
Move the cursor to the position for the next waypoints, and confi rm the position by 4
pressing the tick key or rotary knob again
Repeat moving the cursor and pressing the rotary knob until all 5
waypoints in the route are created
Press the ‘ 6
MENU’
key to save the route
The Edit route mode and route information is indicated on top of the panel until the route
is saved.
The route can also be created from the Routes list as described later in this section.
Editing a route by using the cursor
You can edit a route on a chart panel by using the cursor;
Select the route by resting the cursor over it 1
The route will be highlighted
-
Press the ‘ 2
MENU’
key and select the edit option
The Edit route mode and route information is indicated on top of the panel
-
Move the cursor to where you want to make the edit; a waypoint or a 3
leg, and press the ‘MENU’ key again to select edit options
The options available in the Edit route menu depend on if the cursor is
-
rested over a waypoint or over a leg
Use the cursor to add, move or remove any item 4
Press the ‘ 5
MENU’
key again and save your edits
PLOT GO TO
MARK VESSEL
MENU WIN