B&G Zeus 12 - Manual (Page 41)

40
How to Display Other Vessels
Icon Filters
Select which targets to display.
Extension Lines
Sets the length of the extension lines for your
vessel and for other vessels.
Heading information is read from active
heading sensor, and COG information is as
received from an active positioning system.
The length of the extension line is either a
set distance e.g. 1 mile, OR the distance the
vessel will move in the selected time period.
COG
HEADING
COG (Course Over Ground) - Dark Red Line
HEADING - Blue Line
Speed & Course
Selects how to use the extension line to
indicate speed and course for targets; either
as true motion in the chart or relative to your
vessel.
AIS Icon Orientation
Sets the orientation of the AIS icon; either
based on heading or COG information.
Receiving MMSI Messages
You need to have your own MMSI number entered in the Zeus
system to be able to receive addressed messages from AIS and
DSC vessels. this prevents your own vessel from being displayed
as a dangerous AIS target, if fitted with an AIS transponder.
The Vessel message option in the alarm settings must be toggled
on if any MMSI message shall be displayed, refer to next page.
MENU WIN
x2