85 using bep czone 19 – B&G Zeus 12 User Manual
Page 86
85
Using BEP CZone
19.
The BEP CZone icon will only show if enabled in Advanced setup of the Systems Settings
menu.
BEP CZone is a NMEA 2000 compliant (SimNet) system that controls and monitors circuit
information on your vessel. It also contains onboard diagnostics, multifunction timer
capabilities, dimmer circuits and uses multi-voltages (9-32V DC). If the BEP CZone
system is connected to your Zeus unit, you can access various functions.
Typical electrical layout confi guration
Problems with typical electrical layout configuration:
Conductor sizes are large due to long distances between loads and control/
-
protection devices.
Long cable runs, multiple conductors and complex inter-helm switching of common
-
circuits.
Switch panel wiring is complicated and time consuming to install.
-
Contour Zone system layout confi guration