Bio-Rad Experion Protein Analysis Kits - Manual (Page 15)

1.2.9 Run the Pro260 Analysis
1. Open the lid of the electrophoresis station by pulling the release latch. Place the
primed and loaded chip on the chip platform and close the lid.
2. In the Experion software toolbar, click the New Run button . The New Run
screen opens (Figure 1.5).
Fig. 1.5. Details of the New Run screen. The green dot in the lower right corner indicates that
communication between the electrophoresis station and Experion software has been established.
3. From the Assay drop-down list, select Protein > Pro260.
4. Select a project folder for the run from the Project drop-down list.
-Or-
Create a new project folder by typing a name in the Project field or by selecting
File > Project > New.
The project folder appears in the project tree after the run has started.
5. Enter a name for the run in the Run Prefix field.
6. Click the Start Run button at the top of the window to start the run. The New Run
dialog opens (Figure 1.6).
11
10010510A.qxp 2/13/2008 11:43 AM Page 11