Bio-Rad ChromLab™ Software - Manual (Page 81)

Connecting the NGC System to the ChromLab Computer
Installation Guide | 79
Establishing a Network Connection
When establishing a connection between the NGC system and the ChromLab
computer through your network infrastructure, ensure that they are both on the
same subnet. A DHCP server is required so that the system receives an IP address.
Note: The DHCP server should be configured to always assign the same IP
address to the system. See your network administrator for more information.
Tip: You should have already inserted the Cat 6 ethernet cable into the port at
the back of the NGC instrument. See To connect the power and communication
cables on page 77 .
To establish a network connection
 Insert the loose end of the Cat 6 ethernet cable into the network connection
router or hub.