Bio-Rad Model EG-1 Econo™ Gradient Monitor - Manual (Page 6)

Section 3
Unpacking
Carefully remove the contents of the shipping box, and check for any
obvious damage or problems with the instrument. Figure 2.1 shows the
parts included with the Model EG-1 Econo Gradient Monitor. Check off all
parts against the supplied packing list.
If any parts are missing or damaged, contact Bio-Rad Laboratories
immediately.
Also includes: Instruction Manual, 3 male luer fittings and 3 female luer fittings.
Fig. 2.1. Parts supplied with the Model EG-1 Econo Gradient Monitor.
Note: The Model EG-1 Econo Gradient Monitor requires a power
adaptor. If you did not receive one, contact your local Bio-Rad
representative.
3
Flow Cell
Cable 4
Control Unit
M7318150H 2/27/1 2:06 PM Page 3