Bio-Rad Model EG-1 Econo™ Gradient Monitor - Manual (Page 9)

4.2 Rear Panel Sockets
Fig. 3.2. Rear panel sockets.
The rear panel of the Model EG-1 Econo Gradient Monitor control unit
contains an On/Off power switch and four sockets for electrical
connections (see Figure 3.2). A brief description of each socket follows.
Display Function
Power Entry For connection of the 12 VDC
power adaptor.
Signal Output For connection of chart recorders,
Socket integrators and computers to the
Model EG-1 Econo Gradient
Monitor using standard Bio-Rad
cables. See Section 4.2 and
Appendix B.
Flow Cell For connection of the flow cell’s
Socket Signal Cable.
Remote Socket This feature is not implemented
in the Model EG-1.
6
M7318150H 2/27/1 2:06 PM Page 6