Yealink VP530 - Manual (Page 102)

User Guide for the VP530 IP Video Phone
90
3. Press the 123 soft key to switch the input mode and then enter the voice mail access
code (e.g. *86).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
5. Tap to return to the idle screen.
Note
To listen to the voice mails:
1. When the phone user interface prompts receiving new voice mails, tap the Connect
soft key to dial out the access voice mail code.
2. Follow the voice prompt to listen to the voice mails.
Note
To view the voice mail via phone user interface:
1. Tap ->Message->Voice Mail->View Voicemail.
The phone LCD screen displays the amount of the voice mails that includes new or
old voice mails.
2. Tap the desired account to listen to the voice mails.
The VP530 IP video phone supports MWI feature when receiving a new voice message.
If someone leaves you a voice mail, you will receive a message waiting indicator. MWI
will be indicated in three ways: a warning tone, the event indicator LED flashes green
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the event indicator LED will turn off.