Yealink VP530 - Manual (Page 77)

Basic Call Features
65
2) Enter the destination number you want to forward all unanswered incoming
calls to in the Target field.
3) Tap the pull-down list of After Ring Time and then select the ring time to wait
before forwarding (The default ring time is 120 seconds).
4) (Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the idle screen indicates the call forward is enabled.
You can also configure forward feature via web user interface at the path
Phone->Features.
Note
To disable call forward:
1. Tap ->Call Feature->Call Forward.
2. Tap the desired forwarding type.
3. Tap to disable the call forward.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the Forward soft key.
You can also enter the SIP URL or IP address in the Target field. For more information on
using the SIP URL or IP address, refer to
Placing Calls on page 52 .
Call forward feature is local to the phone, and may be overridden by the server settings.
Call forward on code or off code may be different between servers. For more
information, contact your system administrator.