Yealink VP530 - Manual (Page 27)

Getting Started
15
3. Tap the pull-down list of Type and then select Static IP.
4. Enter the parameters IP, subnet mask, gateway, primary DNS, second DNS in the
corresponding fields.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
6. Tap to return to the idle screen.
Note
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready to use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to
Account Management on page 44 .
If the phone has successfully started up, the idle screen will appear on the phone LCD
screen as shown below:
Wrong network parameters may result in inaccessibility of your phone and may also
have an impact on your network performance. For more information on these
parameters, contact your system administrator.