Processor, Removing the processor, Replacing the processor – Dell Latitude E6510 User Manual
Page 40
Back to Contents Page
Processor
Dell™ Latitude™ E6510 Service Manual
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
access panel
.
4.
Remove the
heat sink and fan assembly
.
5.
Turn the cam screw counter-clock wise until it comes to a stop to release the processor from the system board.
6.
Carefully lift the processor up from its slot on the system board and remove the processor from the computer.
Replacing the Processor
To replace the processor, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.
CAUTION:
While replacing the processor, ensure that the cam lock is in the fully open position before seating the processor module. A processor
module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and socket.