Sd card board, Removing the sd card board, Replacing the sd card board – Dell Latitude E6510 User Manual
Page 41
Back to Contents Page
SD Card Board
Dell™ Latitude™ E6510 Service Manual
Removing the SD Card Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
3.
Remove the
access panel
.
4.
Remove the
optical drive
.
5.
Remove the
keyboard
.
6.
Remove the
hinge covers
.
7.
Remove the
SD card
.
8.
Remove the
display assembly
.
9.
Remove the
palm rest assembly
.
10.
Release the cable tab and disconnect the SD card data cable from the system board.
11.
Remove the screw that secures the SD card board to the computer.
12.
Lift the SD card board up and away from the computer.
Replacing the SD Card Board
To replace the SD card board, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.