To disarm the system – Dodge 2015 Dart - Owner Manual User Manual

Page 23

Advertising
background image

same exterior zone (refer to ЉKeyless Enter-N-Go™Љ

in ЉThings To Know Before Starting Your VehicleЉ for

further information).

• Push the LOCK button on the Remote Keyless Entry

(RKE) transmitter.

3. If any doors are open, close them.

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of

the following methods:

• Push the UNLOCK button on the Remote Keyless

Entry (RKE) transmitter.

• Grasp the Passive Entry Unlock Door Handle if

equipped, refer to “Keyless Enter-N-Go™” in “Things

To Know Before Starting Your Vehicle” for further

information.

• Cycle the vehicle ignition system out of the OFF

position.

• For vehicles equipped with Keyless Enter-N-Go™,

push the Keyless Enter-N-Go™ START/STOP but-

ton (requires at least one valid Key Fob in the

vehicle).

• For vehicles not equipped with Keyless Enter-N-

Go™, insert a valid key into the ignition switch and

turn the key to the ON position.

NOTE:

• The driver’s door key cylinder and the trunk button on

the RKE transmitter cannot arm or disarm the Vehicle

Security Alarm.

• When the Vehicle Security Alarm is armed, the interior

power door lock switches will not unlock the doors.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

Advertising