Brake system, Brake master cylinder – Dodge 2015 Dart - Owner Manual User Manual

Page 601

Advertising
background image

Brake System

In order to assure brake system performance, all brake

system components should be inspected periodically.

Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

WARNING!

Riding the brakes can lead to brake failure and
possibly a collision. Driving with your foot resting or
riding on the brake pedal can result in abnormally
high brake temperatures, excessive lining wear, and
possible brake damage. You would not have your full
braking capacity in an emergency.

Brake Master Cylinder
The fluid level in the master cylinder should be checked

when performing under hood services, or immediately if

the brake system warning light is on.

Be sure to clean the top of the master cylinder area before

removing the cap. If necessary, add fluid to bring the

fluid level up to the requirements described on the brake

fluid reservoir. Fluid level can be expected to fall as the

brake pads wear. The brake fluid level should be checked

when the pads are replaced. However, low fluid level

may be caused by a leak and a checkup may be needed.
NOTE:

If your vehicle is equipped with a manual trans-

mission

, the brake fluid reservoir supplies fluid to both

the brake system and the clutch release system. The two

systems are separated in the reservoir, and a leak in one

system will not affect the other system. The manual

transmission

clutch release system should not require

fluid replacement during the life of the vehicle. If the

brake fluid reservoir is low and the brake system does

not indicate any leaks or other problems, it may be a

result of a leak in the hydraulic clutch release system. See

your local authorized dealer for service.

7

MAINTAINING YOUR VEHICLE 599

Advertising