Automatic transmission — if equipped, Keyless enter-n-go, Normal starting – Dodge 2015 Dart - Owner Manual User Manual

Page 418: Using the engine start/stop button

Advertising
background image

NOTE:

• The engine will not start unless the clutch pedal is

pressed to the floor.

• If the key will not turn and the steering wheel is

locked, rotate the wheel in either direction to relieve

pressure on the locking mechanism and then turn the

key.

Automatic Transmission — If Equipped

The shift lever must be in the PARK or NEUTRAL

position before you can start the engine. Depress the

brake pedal before shifting to any driving gear.
NOTE:

You must press the brake pedal before shifting

out of PARK.

Keyless Enter-N-Go™

This feature allows the driver to oper-

ate the ignition switch with the push

of a button, as long as the Remote

Keyless Entry (RKE) transmitter is in

the passenger compartment.

Normal Starting

Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.
2. Press and hold the brake pedal while pushing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will

disengage automatically after 10 seconds.

416 STARTING AND OPERATING

Advertising