Tamper alert, To use the panic alarm – Dodge 2015 Dart - Owner Manual User Manual

Page 24

Advertising
background image

The Vehicle Security Alarm is designed to protect your

vehicle. However, you can create conditions where the

system will give you a false alarm. If one of the previ-

ously described arming sequences has occurred, the

Vehicle Security Alarm will arm regardless of whether

you are in the vehicle or not. If you remain in the vehicle

and open a door, the alarm will sound. If this occurs,

disarm the Vehicle Security Alarm.
If the Vehicle Security Alarm is armed and the battery

becomes disconnected, the Vehicle Security Alarm will

remain armed when the battery is reconnected; the

exterior lights will flash, the horn will sound. If this

occurs, disarm the Vehicle Security Alarm.

Tamper Alert

If something has triggered the Vehicle Security Alarm in

your absence, the horn will sound three times, and the

exterior lights blink three times when you unlock the

doors. Check the vehicle for tampering.

To Use The Panic Alarm

To turn the Panic Alarm feature on or off, push and hold

the PANIC button on the Key Fob/Remote for at least

one second and release. When the Panic Alarm is on, the

headlights will turn on, the park lights and turn signals

will flash, the horn will pulse on and off, and the interior

lights will turn on.
The Panic Alarm will stay on for three minutes unless

you turn it off by either pushing the PANIC button a

second time or drive the vehicle at a speed of 15 mph

(24 km/h) or greater.
NOTE:

• The interior lights will turn off if you cycle the ignition

switch to the ACC or ON/RUN position while the

Panic Alarm is activated. However, the exterior lights

and horn will remain on.

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising