Settings — evic units and language selection, Oil change indicator – Dodge 2015 Dart - Owner Manual User Manual

Page 336

Advertising
background image

number of stored warning messages. Pushing the RIGHT

arrow button will allow you to see what the stored

messages are.
Settings — EVIC Units And Language Selection
Displays the units used for the Outside Temperature,

Average and Current Fuel Economy, Distance to Empty

and Tire Pressure features. Push and release the RIGHT

arrow button to toggle units between ЉU.S.Љ and ЉMET-

RICЉ.
Push and release the UP arrow button until the Language

is displayed, then push and release the Right arrow

button to select English, Francais, or Espanol depending

on availability.

Oil Change Indicator

• Your vehicle is equipped with an engine oil change

indicator system. The “Oil Change Due” message will

display in the EVIC display for approximately 10

seconds after a single chime has sounded, to indicate

the next scheduled oil change interval. The engine oil

change indicator system is duty cycle based, which

means the engine oil change interval may fluctuate,

dependent upon your personal driving style.

• Unless reset, this message will continue to display

each time you turn the ignition switch to the ON/RUN

position or cycle the ignition to the ON/RUN position

if equipped with Keyless Enter-N-Go™. To turn off the

message temporarily, push and release the MENU

button. To reset the oil change indicator system (after

performing the scheduled maintenance) refer to the

following procedure.

Vehicles Equipped With Keyless Enter-N-Go™

1. Without pushing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine).

334 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising