Enabling and disabling parksense, Service the parksense® rear park assist system, Service the parksense® rear park assist – Dodge 2015 Dart - Owner Manual User Manual

Page 272: System

Advertising
background image

Enabling And Disabling ParkSense®

ParkSense® can be enabled and disabled using the

Uconnect® System. The available choices are: Off, Sound

Only, or Sound and Display. Refer to “Uconnect® Set-

tings” in “Understanding Your Instrument Panel” for

further information.
When the ParkSense® button is pushed to disable the

system, the Driver Information Display (DID) will dis-

play the “PARKSENSE OFF” message for approximately

five seconds. Refer to “Driver Information Display (DID)

” in “Understanding Your Instrument Panel” for further

information. When the shift lever is moved to REVERSE

and the system is disabled, the DID will display the

“PARKSENSE OFF” message for as long as the vehicle is

in REVERSE.

Service The ParkSense® Rear Park Assist
System

During vehicle start up, when the ParkSense® Rear Park

Assist System has detected a faulted condition, the

instrument cluster will actuate a single chime, once per

ignition cycle, and it will display the “PARKSENSE

UNAVAILABLE WIPE OFF REAR SENSORS” or the

“PARKSENSE UNAVAILABLE SERVICE REQUIRED”

message. Refer to “Driver Information Display (DID)” for

further information. When the shift lever/gear selector is

moved to REVERSE and the system has detected a

faulted condition, the DID will display the ЉPARKSENSE

UNAVAILABLE WIPE OFF REAR SENSORSЉ or
Љ

PARKSENSE UNAVAILABLE SERVICE REQUIREDЉ

message for as long as the vehicle is in REVERSE. Under

this condition, ParkSense® will not operate.
If “PARKSENSE UNAVAILABLE WIPE OFF REAR SEN-

SORS” appears in the Driver Information Display (DID)

make sure the outer surface and the underside of the rear

270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising