Dodge 2015 Dart - Owner Manual User Manual

Page 356

Advertising
background image

• Unless reset, this message will continue to display

each time you turn the ignition switch to the ON/RUN

position or cycle the ignition to the ON/RUN position

if equipped with Keyless Enter-N-Go™. To turn off the

message temporarily, push and release the MENU

button. To reset the oil change indicator system (after

performing the scheduled maintenance) refer to the

following procedure.

Vehicles Equipped With Keyless Enter-N-Go™

1. Without pushing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine).

2. Fully push the accelerator pedal, slowly, three times

within 10 seconds.

3. Cycle the ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go™

1. Turn the ignition switch to the ON/RUN position (do

not start the engine).

2. Fully push the accelerator pedal, slowly, three times

within 10 seconds.

3. Turn the ignition switch to the OFF/LOCK position.
Using The DID Menu
Vehicles Equipped With Passive Entry

• Without pushing the brake pedal, push the ENGINE

START/STOP button and cycle the ignition to the

ON/RUN position (Do not start the engine.)

• Push and release the DOWN

arrow button to

scroll downward through the main menu to “Ve-

hicle Info”.

• Push and release the RIGHT

arrow button to

access the ”Oil Life” screen.

• Push and hold the RIGHT

arrow button for one

second to access the ”Oil Life Reset” screen.

354 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising