Lane change assist, Flash-to-pass, High/low beam switch – Dodge 2015 Durango - Owner Manual User Manual

Page 183

Advertising
background image

When the Daytime Running Lights are on and a turn

signal is activated, the Daytime Running Lamp will turn

off on the side of the vehicle in which the turn signal is

flashing. The Daytime Running Lamp will turn back on

when the turn signal is turned off.

Lane Change Assist

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

Flash-To-Pass

You can signal another vehicle with your headlights by

partially pulling the multifunction lever toward the steer-

ing wheel. This will cause the high beam headlights to

turn on until the lever is released.

High/Low Beam Switch

Push the multifunction lever toward the instrument

panel to switch the headlights to high beam. Pulling the

multifunction back toward the steering wheel will turn

the low beams back on, or shut the high beams off.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181

Advertising